VAL-D'OR, Québec, Oct. 16, 2024 (GLOBE NEWSWIRE) -- Cartier Resources Inc. (TSXV: ECR, FSE: 6CA) ("Cartier" or the "Company") reports high-grade gold results from drilling exploration at its 100%-owned East Cadillac property. The latter is located 45 km east of the Val-d'Or mining camp.
Highlights
- The 28,000-m (174 drill holes) drilling exploration program continue to deliver high-grade gold results on the East Cadillac property (FIGURE).
- Multiple high-grade gold intersections over considerable thickness, near surface, form a new gold system at North Contact Sector (Tables 1 and 2 below):
- 14.7 g/t Au over 4.3 m included within 5.2 g/t Au over 20.6 m
- 6.3 g/t Au over 4.0 m included within 3.0 g/t Au over 15.0 m
- 5.7 g/t Au over 4.0 m including 15.0 g/t Au over 1.0 m
- Two drill rigs continue to explore high-grade gold targets along the regional Larder Lake - Cadillac Fault Zone.
Table 1: Details of the new high-grade gold results of the North Contact Sector
| Hole | Coordinates
UTM (m) | Azimuth (°) / Plunge (°) | From (m) | To
(m) | Au (g/t) | Length
(m) |
| CH24-173 | 335569/5320090/364 | 167/-76 | 149.3 | 150.3 | 40.4 | 1.0 |
| Included within | 146.0 | 150.3 | 14.7 | 4.3 | ||
| Included within | 145.0 | 155.5 | 7.2 | 10.5 | ||
| Included within | 134.9 | 155.5 | 5.2 | 20.6 | ||
| CH24-177 | 335670/5320160/363 | 187/-68 | 231.0 | 233.0 | 9.1 | 2.0 |
| Included within | 229.0 | 233.0 | 6.3 | 4.0 | ||
| Included within | 225.0 | 240.0 | 3.0 | 15.0 | ||
| CH24-176 | 170/-56 | 191.0 | 192.0 | 15.0 | 1.0 | |
| Included within | 191.0 | 195.0 | 5.7 | 4.0 |
The estimated true widths of the mineralized intersections are approximately 65 to 90% of the reported lengths.
Table 2: Details of the highest historical drill results of the North Contact Sector
| Hole | Coordinates UTM (m) | Azimuth (°) /
Plunge (°) | From (m) | To (m) | Au
(g/t) | Length (m) |
| ECG-18-072 | 335601/5320161/364 | 195/-55 | 198.3 | 200.3 | 6.9 | 2.0 |
| Included within | 197.5 | 202.3 | 4.7 | 4.8 |
The estimated true widths of the mineralized intersections are approximately 85% of the reported lengths.
Quality Assurance / Quality Control
For each batch of samples sent to the laboratory, Cartier inserts 5% of the number of samples in the form of certified standards and another 5% in the form of blanks to ensure quality control. The samples are analyzed at the Techni-Lab (Actlabs) laboratory in Ste-Germaine-Boulé, Québec, Canada. Samples weighing 3 to 5 kg are crushed by the laboratory to 90% passing 10 mesh (2.00 mm), then a 500 g fraction of each sample is pulverized to 90% passing 200 mesh (0.07 mm). The resulting 50 g pulps are analyzed by fire assay with an atomic absorption finish. Samples with results ≥ 1.0 g/t and
Qualified Persons
The Company's scientific and technical information in this news release was prepared and reviewed by Mr. Gaétan Lavallière, P.Geo., Ph.D., Vice-President, and Mr. Ronan Déroff, P.Geo., M.Sc., Senior Geologist, Project Manager and Geomatician, both qualified persons as defined in National Instrument 43 101. Mr. Lavallière approved the information contained in this press release.
About Cartier Resources Inc.
Founded in 2006, Cartier Resources Inc. is an exploration company based in Val-d'Or, Québec, Canada. The Company's projects are located in Québec, which consistently ranks among the world's best mining jurisdictions. Cartier is actively advancing the development of its flagship Chimo Mine Project which consists of the Chimo Mine and East Cadillac properties. The Company has significant corporate and institutional support, including Agnico Eagle Mines, O3 Mining and provincial investment funds.
For more information, contact:
Philippe Cloutier, P.Geo.
President and CEO
Telephone: 819-856-0512
philippe.cloutier@ressourcescartier.com
Neither the TSX Venture Exchange nor its regulatory services provider accepts responsibility for the adequacy or accuracy of this press release.
A photo accompanying this announcement is available at
https://www.globenewswire.com/NewsRoom/AttachmentNg/05bbb14f-f9f0-4812-9103-f918eb64d5a7